Wood Grain Transfer Printing filmandWood-Plastic Transfer printing filmWhat's the difference?

        Wood Grain Transfer Printing filmandWood-Plastic Transfer printing filmareIsA special film which is printed with various patterns and can be transferred to another material under certain conditions. They can make the original material with wood grain or wood-plastic effect, in order to achieve special and personalized purposes, now widely used in various occasions in life.

Wood Grain Transfer Printing filmandWood-Plastic Transfer printing filmProcess and application:

Process one: Suitable for large area or special-shaped base material

Step One: Select the base material that has been sprayed or electrophoresis

The second step: the wood grain heat transfer paper is transferred to the substrate wrapped, with high-temperature-resistant adhesive paper to hold the interface of the paper, in case the wood grain heat transfer paper release. (Note: Wood grain heat transfer paper face to be transferred to the substrate. ）

The third step: again in the wood grain heat transfer paper wrapped base material with high temperature and good sealing tube plastic bags, and then from the plastic bag at both ends of the vacuum, until plastic bags can be fully and effectively close to the substrate. The negative pressure of vacuum should be adjusted according to the characteristics of the transfer substrate and the negative pressure that plastic bag can withstand, usually between 0.3~0.8mpa. (Note: The purpose of using plastic bags is to make the plastic bags that have been pressed against the substrate by negative pressure to force the wood grain heat transfer paper to be fully and effectively glued to the substrate.) ）

The fourth step: send the base material which has been wrapped to bake in the oven, baking temperature and the length of time should be based on the characteristics of the transfer of the substrate, to transfer the depth of the texture and the specific performance of the oven and other comprehensive factors to make appropriate adjustments, usually transfer the temperature of 160~180℃, the time is 5-8 minutes

Fifth step: Remove from the oven has been transferred from the substrate, from the transfer of the substrate to pull off the plastic bag (note: This plastic bag can be used for reuse), tear off the heat transfer paper, do surface cleaning

Process two: Suitable for the plane base material

Step One: Select the base material that has been sprayed or electrophoresis

The second step: the wood grain heat transfer paper front and the surface of the substrate to be printed on the front to pave

The third step: Plate heat transfer machine pressure, heating, usually transfer temperature of 160~180℃, time is 18-25 seconds

Fourth: Remove the Heat transfer paper, the use of pet transfer printing film: Suitable for special-shaped base material

Fifth step: Using Pet thermal transfer film to be transferred to the substrate wrapped, with ultrasonic sealing machine Pet thermal Transfer film sealed into a tubular bag. (Note: Pet Thermal Transfer film to the front with the transfer of the substrate is the face sticker. ）

Sixth step: From the tubular pet heat transfer film bag at both ends of the vacuum, until the pet thermal transfer film can be fully and effectively close to the substrate. The negative pressure of the vacuum should be adjusted according to the characteristics of the transfer substrate and the negative pressure of the pet heat transfer film, usually between the 0.3~0.8mpa

The seventh step: send the base material which has been wrapped to bake in the oven, baking temperature and the length of time should be based on the characteristics of the transfer of the substrate, to transfer the depth of the texture and the specific performance of the oven and other comprehensive factors to make appropriate adjustments, usually transfer the temperature of 160~180℃, the time is 5-8 minutes

Eighth step: Remove from the oven has been transferred from the substrate, by hand or mechanical blowing (that is, by blowing the pet heat transfer film tubular bag blowing) the way to remove the pet heat transfer film.

Wood Grain Transfer Printing filmandWood-Plastic Transfer printing filmAre common in our life products, technology is very mature.